Remedy
- Check setting of the motor data.
- Ensure that the motor is at a standstill during the pole position identification process.
- Ensure that the motor and inverter match each other in terms of power.
Cause
- Too many deviations during the pole position identification.
- Compared to the inverter, the rated motor current is too high or too low.
Description
Fault - Pole position identification
Keypad display
Pole pos. error
Fault message ID
28961
Severity/response
Fault (configurable) Setting parameters: 0x2C60
Severity/response - 2
Setting parameters: 0x2C60