Remedy
1. Execute device command "Load default settings" 0x2022:001 (P700.01). 2. Execute "Save user data" 0x2022:003 (P700.03) or "Save OEM data" 0x2022:006 (P700.06) device command.
Cause
The parameter settings saved in the memory module are incompatible with the firmware type. Example: Memory module of an inverter with an application I/O is used in an inverter with a standard I/O.
Description
EPM data: firmware type incompatible
Keypad display
EPM: FW incomp.
Fault message ID
30353
Severity/response
Fault
- The data have been loaded into the RAM memory, but they are incompatible.